.. experiment.md --- 
.. 
.. Description: 
.. Author: Hongyi Wu(吴鸿毅)
.. Email: wuhongyi@qq.com 
.. Created: 二 5月 28 10:38:45 2019 (+0800)
.. Last-Updated: 二 3月  3 20:03:49 2020 (+0800)
..           By: Hongyi Wu(吴鸿毅)
..     Update #: 18
.. URL: http://wuhongyi.cn 

##################################################
experiment
##################################################

About multiplicity output in RJ45 in PKU firmware

- when setting multiplicity==0, output high level
- when setting multiplicity>=1, the default output is low level, and it is high when triggered.



**When the MSRB bit 6 is 1**

- the synchronization indication signal can be obtained
- have the DPMFULL output information
- have back plane FT, VT information

============================================================
online monitor
============================================================

After modifying the parameter configuration file ``settings.ini``, you need to run the following program to modify the register settings.


.. code:: bash
	  
  ./progfippi

**It should be noted that the program is not allowed to be executed when DAQ running**

You can view the parameters settings in the web page, and the scaler counter and so on.




----

============================================================
experiment mode
============================================================

We will provide a common combination of firmware and software for the following four types of experiments.

----------------------------------------------------------------------
in beam gamma
----------------------------------------------------------------------

**designing. . .**

.. image:: /_static/img/expinbeamgamma_1.png

.. image:: /_static/img/expinbeamgamma_2.png
	   


----------------------------------------------------------------------
beta decay
----------------------------------------------------------------------

.. image:: /_static/img/betadecay.jpg

Listed below is the silicon detector information in the detection array:
	   
- QSDΔE1
    - MICRON MSQ25, Junction 4, 50.0mm x 50.0mm, 309um
- QSDΔE2
    - CIAE Q300, Junction 4, 50.0mm x 50.0mm, 300um
- DSSD1
    - MICRON W1, Junction 16, Ohmic 16, 49.5mm x 49.5mm, 142um
- DSSD2
    - MICRON W1, Junction 16, Ohmic 16, 49.5mm x 49.5mm, 142um
- DSSD3
    - MICRON W1, Junction 16, Ohmic 16, 49.5mm x 49.5mm, 142um
- QSD1
    - MICRON MSQ25, Junction 4, 50.0mm x 50.0mm, 1546um
- QSD2
    - CIAE Q300, Junction 4, 50.0mm x 50.0mm, 300um
- QSD3
    - CIAE Q300, Junction 4, 50.0mm x 50.0mm, 300um   	   

The signals of the plastic scintillator T1 and T2 are converted into pulse amplitude information by TAC, which can be collected using 100MSPS module.
      
	   
**designing. . .**

.. image:: /_static/img/expbetabecay_1.png

.. image:: /_static/img/expbetabecay_2.png	   



----------------------------------------------------------------------
nuclear reaction
----------------------------------------------------------------------

**designing. . .**

----------------------------------------------------------------------
Super heavy nucleus
----------------------------------------------------------------------

**designing. . .**

.. image:: /_static/img/expsuperheavy_1.png

.. image:: /_static/img/expsuperheavy_2.png
	   




..
.. experiment.md ends here